Lightning Protection Corp.
P.O. Box 6086, Santa Barbara,
CA 93160 Phone: (800) 317-4043
phone: (805) 967-4577
Fax: (805) 967-4320
E-mail: info@lightningprotectioncor.com
All Categories > AC Power > AC POWER LIGHTNING AND SURGE PROTECTIVE DEVICES -- 1000 VRMS MAX, 50/60 Hz > SERIES LPC 2090 - XXXX  


SERIES LPC 2090 - XXXX

Dash numbers are assigned according to customer inputs on details such as : enclosure type N12, N4, N4X; remote alarm relays; light, medium, heavy, and extra heavy duty; other requirements.

Customer inquiry is invited for advice and recommendations on the proper model choice for the application.



 General Specifications 



AC POWER LIGHTNING AND SURGE PROTECTIVE DEVICES (SPD)
FOR SINGLE & THREE PHASE, TO 1000 VRMS, 50/60 Hz SERVICE
  1. For use at : service entrance, transfer switch, distribution panels, and directly on the equipment itself requiring protection; at service entrance for line side or load side of the main disconnect means.
  2. Instantaneous and automatic in operation, no re-setting required. Conduction of overvoltage condition starts immediately and extinguishes the instant the transient passes. Response is less than one nanosecond. Protection provided in all applicable modes, L – L, L – N, L – G, N – G.
  3. Gapless – no spark gaps. High energy, multiple, solid state devices are used for dependable protection of sensitive equipment. There is no impulse breakdown voltage.
  4. KVA unlimited. The SPD is connected across the power lines on any KVA rated source or load. Series impedance (inductors, resistors, etc.) not used.
  5. No power follow current : The SPD conducts transients and stops conduction the instant the line voltage returns to normal.
  6. Bipolar operation. Clamping voltages are of same value in either polarity of the transient.
  7. The SPD provides protection against transients coming in on the power lines or generated from within the facility.
  8. Routine testing not required. Periodical maintenance not required. The SPD has no moving parts and draws no power current. The condition of the SPD is continuously self-monitoring with indicator lamps and optional remote alarm relays installed in each phase : These show whether or not the TVSS is operational.
  9. Life of the SPD generally exceeds the life of the equipment being protected.
  10. Surge Current (8/20 µs wave) ratings per mode to 240,000 amperes. Special designs for ultra critical applications are rated equivalent to 1,200,000 amperes per mode.
  11. Indicator lamps and remote alarm relays (provided with NO and NC contacts).
  12. Temperature range -55° to +170° F; altitude to 20,000 ft.
  13. SPD is completely enclosed in appropriate enclosure for any specified environment: outdoor, indoor, water hose down, corrosive atmosphere, explosive atmosphere.
  14. Detailed specifications are provided for each specific model.
  15. Lightning Protection Corporation designs and manufactures under strict quality control measures of ISO 9001-2000, registration certified by Underwriters Laboratories, File No. A5103.



Print Back